ESP32 GPS and CC1101 Board

Warnings

3min

Do not use the ESP32 or CC1101 modules while the antennas are disconnected from the board.

Only use the 433MHz antenna on the CC1101 SMA Connector and the 2.4GHz antenna on the ESP32 SMA Connector.

Disconnect the board from power while connecting or disconnecting a GPS antenna to avoid a short circuit.

When using an external GPS antenna, make sure any metal parts of the antenna does not touch any part of the board as it could cause a short circuit.

When flashing the ESP32 through USB-C, disconnect the board from the Flipper Zero.

Do not use the ESP32 while charging the Flipper Zero.



Updated 29 Feb 2024
Doc contributor
Did this page help you?
PREVIOUS
ESP32 GPS and CC1101 Board
NEXT
ESP32
Docs powered by Archbee