⌘
K
🖥️
CaracalDB Docs
Setting up your Flipper Zero
🎱
ESP32 NRF24 and CC1101 Board
Warnings
ESP32
CC1101
NRF24
👨💻
ESP32 GPS and CC1101 Board
Warnings
ESP32
CC1101
GPS Module
Mini CC1101 Board
Using the CC1101
Mini NRF24 Board
Using the NRF24
Nintendo 64 USB-C Power Supply
Overview
Compatible USB-C Power Sources
Docs powered by
Archbee
ESP32 NRF24 and CC1101 Board
Warnings
2min
Do not use the ESP32, NRF24 or CC1101 modules while the antennas are disconnected from the board.
Only use the 433MHz antenna on the CC1101 SMA Connector and the 2.4GHz antenna on the ESP32 and NRF24 SMA Connector.
When flashing the ESP32 through USB-C, disconnect the board from the Flipper Zero.
Do not use the ESP32 while charging the Flipper Zero.
Updated 28 Mar 2024
Did this page help you?
PREVIOUS
ESP32 NRF24 and CC1101 Board
NEXT
ESP32
Docs powered by
Archbee
TABLE OF CONTENTS
Do not use the ESP32, NRF24 or CC1101 modules while the antennas are disconnected from the board.
Only use the 433MHz antenna on the CC1101 SMA Connector and the 2.4GHz antenna on the ESP32 and NRF24 SMA Connector.
When flashing the ESP32 through USB-C, disconnect the board from the Flipper Zero.
Do not use the ESP32 while charging the Flipper Zero.
Docs powered by
Archbee
